Wiper XSWR12
Function:
Wipers are designed to keep dust, dirt, sand and others off the rod and the sealing and guiding elements, avoiding abrasive damage caused by external contamination.
Features:
- The profile is designed with interference on the OD which provides a good static fit, preventing the entry of humidity and other contamination via the outside diameter.
- The design of the wiper lip supports the recirculation of the remaining oil film into the cylinder, whilst the exclusion of contamination is guaranteed.
- The sealing lip on the fluid side reduces the remaining oil film to a minimum if used in combination with composite seals as a tandem seal.
- For housings acc. to ISO 6195 – Type C.
Reciprocation rods in hydraulic cylinders, plungers.
Can also be used as rod seal/wiper combination in pneumatic applications.
|
Snap-in installation.
When the cylinder can not be dismantled, the wiper can also be installed in cut version. In this case the diameter should be increased by 2-3%.
XSWR12 (D) Abstreifer | 84.1 KB | download PDF |
XSWR12 (GB) Wiper Ring | 79.6 KB | download PDF |