O-Ring XSORH
Eigenschaften:
O-Rings are used in widely differing technical areas, for instance as individual sealing elements in pneumatics and hydraulics, and as preload elements for seals and wipers. O-Rings are double acting, activated by the systempressure. The sealingeffect is generated by axial or radial preload. The preload of the O-ring is superposed by the hydraulic pressure, thus assuring the overall sealing pressure.
Features:- Used for special dimensioned grooves.
- Sealing over a wide range of pressures, temperatures and tolerances.
- Simple and compact design.
- Symmetrical profile cross section.
- Wide application ranges.
- Simple mounting.
- Compact and simple grooves.
- Easy and cost saving constructions possible.
|
Application
Static sealing (e.g. flanges and threaded joints), rotation and linear movement applications with minor loads and small groove dimensions, preloadelement for PTFE seals and wipers.
Seal housing recommandation
| Tolerances | [mm] | |
|---|
S
| f7 / H8 | |
| |
|---|
| Surface roughness | Rtmax [ µ] | Ra [ µ] |
|---|
Bottom of groove
| ≤ 6,3 | ≤ 1,6 |
Face of groove
| ≤ 15 | ≤ 3 |
| |
|---|
| Sliding surface | Rtmax [ µ] | Ra [ µ] |
|---|
| ≤ 6,3 | ≤ 1,6 |
